MonocrystallineBifacialN-type
DMEGC Solar undefined 335W

DMEGC Solar • dmegc solar dm335g1-60hbb

dmegc solar dm335g1-60hbb 335W335W

BifacialN-type
Region:Netherlands
Region shows where the seller or factory is located. Most ship globally, and all listed suppliers should be able to ship to your current location.
335W
Power Output
19.85%
Efficiency
1684 x 1002
Dimensions (mm)
Find Installer

DMEGC Solar 335W Panels: What Your System Looks Like

Based on a standard 10kW residential installation

10kW System Size
30 Panels
Estimated Roof Area
549 sq.ft. (51 m²)
Avg. Yearly Production
11,500 kWh
Generate Professional Technical Report & ROI

Electrical Data (STC)

Maximum Power (Pmax)335 W
Module Efficiency19.85 %
Voltage at Pmax (Vmp)34.1 V
Current at Pmax (Imp)9.84 A
Open Circuit Voltage (Voc)41.74 V
Short Circuit Current (Isc)10.25 A

Mechanical Data

Dimensions1684 x 1002 x 35 mm
Weight18.8 kg
Cell TypeMonocrystalline
Number of Cells0
Front Glass3.2 mm
Frame

Temperature Ratings

Temperature Coefficient of Pmax0 %/°C
Temperature Coefficient of Voc %/°C
Temperature Coefficient of Isc %/°C
Operating Temperature Range-40 - 85 °C

Similar Products

1002 x 1684 mm
Roof Fit Tool

Will These Panels Fit Your Roof?

Don’t guess your solar potential. Our Roof Layout Designer uses the exact dimensions of the DMEGC Solar 335W (335W modules) to map out your system. Visually plan your array to see exactly how many modules your roof can support based on its specific footprint.

Precision Layout Preview: See exactly how the 335W modules sit on your roof.
Accurate Technical Spacing: Factors in real-world gaps and mounting rails.
Instant System Sizing: Automatically calculates total kW output for this specific panel.
Optimization Tips: Suggestions to maximize your roof’s energy density.
Map This Panel on My Roof

Ideal Use Case

The DMEGC Solar 335W is designed for specific solar energy applications. This panel is an excellent choice if you:

Have limited roof space (335W compact panels)
Balance efficiency with cost-effectiveness
Can benefit from ground-reflected light (bifacial design)
Have smaller installation areas or unique roof constraints
Use standard residential panel configurations

Don’t guess your solar setup — calculate it first!

Take our Solar Quiz to get a personalized recommendation for panels, inverter, battery capacity, and system size — before you spend money on the wrong setup.

Run Technical Sizing

Product FAQ

How many DMEGC Solar 335W panels do I need for my home?

The number of panels depends on your energy consumption and roof area. At 335W per panel, a typical 10kW residential system requires about 30 modules. Use our Solar Roof Calculator to get a precise layout based on your actual roof dimensions.

What is the efficiency of DMEGC Solar 335W?

This panel has an efficiency of 19.85%, using Bifacial, N-type cell technology. Higher efficiency means more electricity per square meter, which is especially valuable when roof space is limited.

Can I get more power from the bifacial DMEGC Solar 335W?

Yes. Since this is a Bifacial module, it can capture sunlight from both sides. Depending on the reflectivity (albedo) of your roof surface, you can see a gain of 5% to 25% in total energy yield.

What are the dimensions of the DMEGC Solar 335W?

The module dimensions are 1684mm × 1002mm × 35mm. Always account for these measurements plus fire setbacks and mounting clearances when planning your solar layout.

Is DMEGC Solar 335W compatible with standard inverters?

Yes, these panels work with most string and hybrid inverters. However, you must check the Voc (Open Circuit Voltage) and Imp (Current at Max Power) against your inverter's MPPT specs.