
Leapton Solar • leapton solar lp182 m 54 mh 400-415w
leapton solar lp182 m 54 mh 400-415w 410410W
Key Features
- Monofacial Bifacial
- Higher Output Power
- Harsh Environmental Adaptability
- Module adopts 108 pcs of 182*182mm half cells, the maximum power can reach 415W.
- New circuit design, lower internal current, lower internal resistance loss.
- Strict salt spray and ammonia corrosion test by TUV Nord.
- PID Protection
- Ensure the attenuation probability caused by PID phenomenon is minimized.
- Load Capacity
- Mechanical load tests including wind load 2400 Pa and snow load 5400 Pa done by TUV Nord.
- MBB Cell Low Light Features
- Higher performance under low light environment.
Leapton Solar 410 Panels: What Your System Looks Like
Based on a standard 10kW residential installation
Electrical Data (STC)
Mechanical Data
Temperature Ratings
Similar Products
Will These Panels Fit Your Roof?
Don’t guess your solar potential. Our Roof Layout Designer uses the exact dimensions of the Leapton Solar 410 (410W modules) to map out your system. Visually plan your array to see exactly how many modules your roof can support based on its specific footprint.
Ideal Use Case
The Leapton Solar 410 is designed for specific solar energy applications. This panel is an excellent choice if you:
Don’t guess your solar setup — calculate it first!
Take our Solar Quiz to get a personalized recommendation for panels, inverter, battery capacity, and system size — before you spend money on the wrong setup.
Product FAQ
How many Leapton Solar 410 panels do I need for my home?
The number of panels depends on your energy consumption and roof area. At 410W per panel, a typical 10kW residential system requires about 25 modules. Use our Solar Roof Calculator to get a precise layout based on your actual roof dimensions.
What is the efficiency of Leapton Solar 410?
This panel has an efficiency of 20.97%, using TOPCon, N-type cell technology. Higher efficiency means more electricity per square meter, which is especially valuable when roof space is limited.
What are the dimensions of the Leapton Solar 410?
The module dimensions are 1724mm × 1134mm × 30mm. Always account for these measurements plus fire setbacks and mounting clearances when planning your solar layout.
Is Leapton Solar 410 compatible with standard inverters?
Yes, these panels work with most string and hybrid inverters. However, you must check the Voc (Open Circuit Voltage) and Imp (Current at Max Power) against your inverter's MPPT specs.
What warranty does the Leapton Solar 410 come with?
This panel includes a 15-year product warranty from Leapton Solar. Solar panels typically degrade about 0.4–0.5% per year, meaning this module should retain over 87% of its original output after 30 years.


