MonocrystallineBifacialTOPConN-type
URECO Solar undefined FAK440C8G

URECO Solar • fak_c8g bb 144 cells 430-450w (usa)

FAK440C8G440W

BifacialTOPConN-type
Region:Taiwan
Region shows where the seller or factory is located. Most ship globally, and all listed suppliers should be able to ship to your current location.
440W
Power Output
19.79%
Efficiency
2122 x 1048
Dimensions (mm)
Find Installer

Key Features

  • FAK_C8G / 144 cells
  • 430W - 450 W
  • Mono-Crystalline Bifacial PV Module
  • URE Peach module uses URE state-of-the-art cell cut technology on high efficiency p-PERC mono-crystalline bifacial cell, and advanced module manufacturing experiences.
  • Positive power tolerance +0 ~ +4.99 watt
  • 100% EL inline inspection
  • Better module reliability
  • Design for 1500 VDC
  • Reduce the system BOS effectively
  • Withstand heavy loading front load 5400 Pa & rear load 2400 Pa
  • Excellent low light performance 3.5% relative eff. Reduction at low (200W/m²)

URECO Solar FAK440C8G Panels: What Your System Looks Like

Based on a standard 10kW residential installation

10kW System Size
23 Panels
Estimated Roof Area
549 sq.ft. (51 m²)
Avg. Yearly Production
11,500 kWh
Generate Professional Technical Report & ROI

Electrical Data (STC)

Maximum Power (Pmax)440 W
Module Efficiency19.79 %
Voltage at Pmax (Vmp)41.1 V
Current at Pmax (Imp)10.71 A
Open Circuit Voltage (Voc)49.1 V
Short Circuit Current (Isc)11.28 A

Mechanical Data

Dimensions2122 x 1048 x 35 mm
Weight24.5 kg
Cell TypeMonocrystalline
Number of Cells144
Front Glass3.2 mm
Frame

Temperature Ratings

Temperature Coefficient of Pmax-0.367 %/°C
Temperature Coefficient of Voc-0.26 %/°C
Temperature Coefficient of Isc0.0449 %/°C
Operating Temperature Range-40 - 85 °C

Similar Products

1048 x 2122 mm
Roof Fit Tool

Will These Panels Fit Your Roof?

Don’t guess your solar potential. Our Roof Layout Designer uses the exact dimensions of the URECO Solar FAK440C8G (440W modules) to map out your system. Visually plan your array to see exactly how many modules your roof can support based on its specific footprint.

Precision Layout Preview: See exactly how the 440W modules sit on your roof.
Accurate Technical Spacing: Factors in real-world gaps and mounting rails.
Instant System Sizing: Automatically calculates total kW output for this specific panel.
Optimization Tips: Suggestions to maximize your roof’s energy density.
Map This Panel on My Roof

Ideal Use Case

The URECO Solar FAK440C8G is designed for specific solar energy applications. This panel is an excellent choice if you:

Build a standard residential 440W system
Balance efficiency with cost-effectiveness
Seek cutting-edge technology with superior efficiency
Install commercial or utility-scale systems

Don’t guess your solar setup — calculate it first!

Take our Solar Quiz to get a personalized recommendation for panels, inverter, battery capacity, and system size — before you spend money on the wrong setup.

Run Technical Sizing

Product FAQ

How many URECO Solar FAK440C8G panels do I need for my home?

The number of panels depends on your energy consumption and roof area. At 440W per panel, a typical 10kW residential system requires about 23 modules. Use our Solar Roof Calculator to get a precise layout based on your actual roof dimensions.

What is the efficiency of URECO Solar FAK440C8G?

This panel has an efficiency of 19.79%, using Bifacial, TOPCon, N-type cell technology. Higher efficiency means more electricity per square meter, which is especially valuable when roof space is limited.

Can I get more power from the bifacial URECO Solar FAK440C8G?

Yes. Since this is a Bifacial module, it can capture sunlight from both sides. Depending on the reflectivity (albedo) of your roof surface, you can see a gain of 5% to 25% in total energy yield.

What are the dimensions of the URECO Solar FAK440C8G?

The module dimensions are 2122mm × 1048mm × 35mm. Always account for these measurements plus fire setbacks and mounting clearances when planning your solar layout.

Is URECO Solar FAK440C8G compatible with standard inverters?

Yes, these panels work with most string and hybrid inverters. However, you must check the Voc (Open Circuit Voltage) and Imp (Current at Max Power) against your inverter's MPPT specs.