MonocrystallineBifacialN-type
URECO Solar undefined FCL670BED

URECO Solar • glory peach fcl_bed 132 cells 650-670w

FCL670BED670W

BifacialN-type
Region:Taiwan
Region shows where the seller or factory is located. Most ship globally, and all listed suppliers should be able to ship to your current location.
670W
Power Output
21.57%
Efficiency
2384 x 1303
Dimensions (mm)
Find Installer

Key Features

  • FCL_BED / 132 cells
  • 650W - 670 W
  • Mono-Cystalline Bifacial PV Module
  • 100% EL inline inspection
  • Better module reliability
  • Positive power tolerance
  • +0 ~ +5 watt
  • 30-Year Power output warranty
  • Withstand heavy loading
  • Front load 5400 Pa & rear load 2400 Pa
  • Design for 1500 VDC
  • Reduce the system BOS effectively
  • PID resistance
  • Excellent PID resistance performance

URECO Solar FCL670BED Panels: What Your System Looks Like

Based on a standard 10kW residential installation

10kW System Size
15 Panels
Estimated Roof Area
506 sq.ft. (47 m²)
Avg. Yearly Production
11,500 kWh
Generate Professional Technical Report & ROI

Electrical Data (STC)

Maximum Power (Pmax)670 W
Module Efficiency21.57 %
Voltage at Pmax (Vmp)38.38 V
Current at Pmax (Imp)17.46 A
Open Circuit Voltage (Voc)46.2 V
Short Circuit Current (Isc)18.51 A

Mechanical Data

Dimensions2384 x 1303 x 35 mm
Weight38.3 kg
Cell TypeMonocrystalline
Number of Cells132
Front Glass2 mm
FrameAnodized Aluminium

Temperature Ratings

Temperature Coefficient of Pmax-0.34 %/°C
Temperature Coefficient of Voc-0.25 %/°C
Temperature Coefficient of Isc0.04 %/°C
Operating Temperature Range-40 - 85 °C

Similar Products

1303 x 2384 mm
Roof Fit Tool

Will These Panels Fit Your Roof?

Don’t guess your solar potential. Our Roof Layout Designer uses the exact dimensions of the URECO Solar FCL670BED (670W modules) to map out your system. Visually plan your array to see exactly how many modules your roof can support based on its specific footprint.

Precision Layout Preview: See exactly how the 670W modules sit on your roof.
Accurate Technical Spacing: Factors in real-world gaps and mounting rails.
Instant System Sizing: Automatically calculates total kW output for this specific panel.
Optimization Tips: Suggestions to maximize your roof’s energy density.
Map This Panel on My Roof

Ideal Use Case

The URECO Solar FCL670BED is designed for specific solar energy applications. This panel is an excellent choice if you:

Require ultra-high output 670W panels for commercial installations
Prioritize high efficiency performance
Can benefit from ground-reflected light (bifacial design)
Install on commercial buildings with ample roof space
Install in hot climates (low temperature coefficient)

Don’t guess your solar setup — calculate it first!

Take our Solar Quiz to get a personalized recommendation for panels, inverter, battery capacity, and system size — before you spend money on the wrong setup.

Run Technical Sizing

Product FAQ

How many URECO Solar FCL670BED panels do I need for my home?

The number of panels depends on your energy consumption and roof area. At 670W per panel, a typical 10kW residential system requires about 15 modules. Use our Solar Roof Calculator to get a precise layout based on your actual roof dimensions.

What is the efficiency of URECO Solar FCL670BED?

This panel has an efficiency of 21.57%, using Bifacial, N-type cell technology. Higher efficiency means more electricity per square meter, which is especially valuable when roof space is limited.

Can I get more power from the bifacial URECO Solar FCL670BED?

Yes. Since this is a Bifacial module, it can capture sunlight from both sides. Depending on the reflectivity (albedo) of your roof surface, you can see a gain of 5% to 25% in total energy yield.

What are the dimensions of the URECO Solar FCL670BED?

The module dimensions are 2384mm × 1303mm × 35mm. Always account for these measurements plus fire setbacks and mounting clearances when planning your solar layout.

Is URECO Solar FCL670BED compatible with standard inverters?

Yes, these panels work with most string and hybrid inverters. However, you must check the Voc (Open Circuit Voltage) and Imp (Current at Max Power) against your inverter's MPPT specs.